Safety Notes - Westfalia 28 31 19 Instruction Manual

Please note the included General Safety Notes and the following
safety notes to avoid malfunctions, damage or physical injury:

Make sure the voltage corresponds to the type label on the unit.

Persons with limited physical, sensorial or mental abilities or lack of know-
how and/or lack of knowledge are not allowed to use the unit, unless they are
supervised for their safety by a qualified person or are briefed by the respon-
sible person how to use the unit.

Only operate the laser drill machine on a grounded wall socket.

Only use approved extension cable with a cable quality of at least 1.5 mm
Ask your electrician. Unroll the extension cable from the cable drum. Never
use a damaged extension cable.

The laser drill machine is designed for drilling metal, wood, plastic and similar
materials. Please observe the appropriate working speed for the resp. materi-
als.

Keep the drill bits and cutting tool clean and sharp at all times and do not use
cutting tools that are not designed for this job.

Only use the machine for domestic purposes and in the way indicated in
these instructions. The machine is not designed for continuous, professional
use.

Do not drill harmful materials for this laser drill machine.

Always keep the power cord away from the moving parts of the laser drill
machine.

Do not allow the laser drill machine to work unattended. If not in use, switch
off the machine.

Do not operate the laser drill machine in damp environment and do not allow
moisture to enter the machine.

Do not operate the laser drill press close to combustible liquids or gases.
There is risk of explosion!

Always fix the workpiece when drilling. Never hold the workpiece to be drilled
with your hands.

Maintaining or cleaning the laser drill machine is only allowed if the spindle
has stopped completely. Additionally unplug from power mains.

Make sure all parts are firmly mounted before switching on the laser drill
machine.

Safety Notes

5
2
.