Table of Contents
Advertisement
Please note the included General Safety Notes and the
following safety notes to avoid malfunctions, damage or
physical injury.
Please also observe the safety notes in the manuals
for battery and charger.
▪ Please read this manual carefully and use the unit only according to this
manual.
▪ When using the tool, use safety equipment including safety glasses and
ear protection. If operating the tool causes discomfort in any way, stop
immediately and review your method of use.
▪ Dispose of used packaging material carefully or store it out of the reach
of children. There is a danger of suffocation!
▪ Persons with limited physical, sensorial or mental abilities are not
allowed to use the unit, unless they are supervised and briefed for their
safety by a qualified person.
▪ Battery chargers are for indoors use only. Ensure that the power supply
and charger are protected against moisture at all times.
▪ Use metal and voltage detectors to locate concealed electric, water or
gas lines. Avoid touching live components or conductors.
▪ Ensure that the lighting is adequate.
▪ Ensure that the drill bit is securely fixed in the chuck. Insecure drill bits can
be ejected from the machine causing a hazard.
▪ Ensure that the drill bit is in contact with the workpiece prior to starting
up the tool.
▪ Before drilling, check that there is sufficient clearance for the drill bit under
the workpiece.
▪ Do not exert pressure on to the tool. To do so would shorten its lifetime.
▪ Drill bits get hot during operation; allow cooling prior to handling them.
▪ Never use your hands to remove sawdust, chips or waste close by the bit.
▪ If you are interrupted when operating the cordless drill, complete the process and switch
off before looking up.
▪ If possible, use clamps or a vice to hold your work.
▪ Examine the chuck regularly for signs of wear or damage. Have damaged parts repaired by
a qualified service centre.
▪ Always wait until the cordless drill has come to a complete stop before putting it down.
▪ Periodically check all nuts, bolts and other fixings and tighten where necessary.
▪ Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
Additional Battery and Charger Safety Notes
WARNING: Li-Ion batteries, if incorrectly used, stored or charged are a fire, burn and
explosion hazard.
SAFETY NOTES
SAFETY NOTES
11
Advertisement
Table of Contents
