Safety Notes - Westfalia 85 93 09 Original Instructions Manual

Please note the included General Safety Notes and the following
safety notes to avoid malfunctions, damage or physical injury:
 Make sure the voltage corresponds to the type label on the unit.
 Before starting any work on walls, floors or similar, make sure that all power
lines in the work area are switched off at the main switchboard. Inspect the
proposed drill hole location for any utility lines (e. g. water, gas, power) before
drilling. Use a suitable device such as a metal or electricity line detecting
device.
 Persons with limited physical, sensorial or mental abilities or lack of know-how
and/or lack of knowledge are not allowed to use the unit, unless they are
supervised for their safety by a qualified person or are briefed by the responsi-
ble person how to use the unit.
 Make sure the cord cannot get caught in any way. Do not wind the cord
around the unit and do not bend it.
 Please switch OFF the unit and unplug from the power supply before cleaning,
maintaining or when not in use.
 Do not jam the cord or pull cord around edges. Do not pinch the power cord in
any way and keep it away from hot surfaces. Do not wind the cord around the
unit and do not bend it.
 Do not operate the unit if it does not work correctly or has been dropped. Do
not disassemble the unit and do not try to repair it yourself. Contact our cus-
tomer service.
 Do not operate the unit with a damaged cable. Do not touch the damaged
cable and pull the mains plug when the cable is damaged while working.
Damaged cables increase the risk of an electric shock.

Safety Notes

3