Westfalia 28 31 19 Instruction Manual page 11


Make sure all wrenches or adjusting tools are removed from the laser drill
machine before starting the machine.

Do not switch on the laser drill machine if the drill bit touches the workpiece.

When operating the laser drill machine, always wear protection
goggles. Wear suitable clothes. Take off jewellery and tie long hair.

Protect your ears. Wear ear protectors.

Do not wear gloves when inserting or replacing drill bits.

When drilling wood please note that dusts can be harmful. Use a
dust mask or if possible, attach suitable dust collection.

Only use replacement parts recommended by Westfalia.

The laser drill machine is equipped with a laser. Do not replace the laser with
a different sized type. Repairs on the laser may only be undertaken by the
manufacturer of the laser or an authorised service.

Do not operate the laser drill machine if the machine does not work correctly
or has been damaged. Do not disassemble the machine and do not try to
repair it yourself. Contact your customer support.

Laser beams can injure your eyes. Do never look directly into the beam. Do
not look into the laser openings. Please note that a laser beam on a reflecting
surfaces can be just as dangerous as looking directly into the laser opening.

Switch off the machine immediately if any malfunction or defects occurs. Do
not disassemble the laser drill machine and do not try to repair is yourself.
Contact our customer support department in case of problems.
Safety Notes
Do not look into the Laser Beam
not even with Optical Instruments
6
Laser Beam
Laser Class 2
P <1 mW, 400 nm