Remote Operation - Uniden ELITE 8855 Series Owner's Manual

Remote Operation

You can check, play, or delete messages when you are away from home. You can
also record your own greeting message. To access your answering machine
remotely, you need a touch tone telephone and a two-digit security code (see
Setting a Security Code on page 65).
1) Call your telephone number and wait for the system to answer. If Toll Saver is
enabled, answering machine will answer in 6 rings if you have new messages
and 9 rings if you don't. If the answering machine is off, it will answer after about
15 rings and sound a series of beeps.
2) During the greeting message (or a series of beeps when the answering machine
is off), press # and enter your security code within two seconds.
3) The answering machine announces the current time and the number of
messages stored in memory. You hear "To play incoming messages, press
pound two. For help, press pound zero." Then, you'll hear a beep. Pressing
# is the same as pressing pound.
4) Enter a command from the following chart within 15 seconds. After the first
command, you have two seconds to enter each command.
[74]
The system will
!
only play back
messages for four
minutes and then
it returns to the
command waiting
mode.
To continue
!
playing your
messages, press #
then 2 again within
15 seconds.
If you enter an
!
incorrect security
code three times,
you will hear a
beep and the
system will return
to standby.
For your
!
convenience, a
remote operation
card is provided
for you to use
while away from
home (refer to
page 90).