Setting Caller Id On Call Waiting - Uniden XCI-600 Operating Manual

*
If the Base Unit loses power while the
Handset is off the Base, the Digital
Code
may
be erased. When this happens, the Handset
will not function.
To re-establish between the Handset and Base
Unit:
1. Restore power to the Base Unit.
2. Place the Handset back on the Base Unit.
3. The Battery icon will
blink to indicate that
TOTAL
CALL::.
the Digital Security
1 ~:::1
Code is set.
Setting Caller ID on Call Waiting
*
You must subscribe to caller id on call waiting
from your local phone service to use this
feature. This feature is not currently provided
by Telstra.
You can set your XCI-SSO phone to display
information about calls that generate a call waiting
tone whileyouare on a call.
.
*
With this feature set you will not be able to
hear the person you are talking to for 2.4
seconds after you receive the call waiting
tone.
To turn Caller ID on Call Waiting on:
1. Remove the Handset from the Base Unit.
2. Press flash/function
I
CJmlD
twice.
CI DC~.J OFF
ON-1
OFF-0
3. Press 1.
CJmlD
CI DC~.JON
Ot"~-1 OFF-~:::1
4. Press memo A
confirmation tone
sounds and the
display remains on
for two seconds.
CJmlD
CI DC~.JON
28