Direct.wall.mounting - Uniden TRU9480 Series Owner's Manual

Direct.Wall.Mounting

If.you.don't.have.a.standard.wall.plate,.you.can.mount.your.phone.directly.to.the.wall..
Before.doing.this,.consider.the.following:
• Avoid.electrical.cables,.pipes,.or.other.items.behind.the.mounting.location.that.
could.cause.a.hazard.when.inserting.screws.into.the.wall.
• Try.to.mount.your.phone.within.5-feet.of.a.working.phone.jack.to.avoid.excessive.
wire.lengths.
• Make.sure.the.wall.material.is.capable.of.supporting.the.weight.of.the.base.and.
handset.
• Use.#0.screws.with.a.minimum.length.of.-3/8.inches,.with.anchoring.devices.
suitable.for.the.wall.material.where.the.base.unit.will.be.placed.
) Insert.two.mounting.screws.into.the.wall,.using.the.appropriate.anchoring.device,.
3-5/6.inches.apart..Allow.about./8.inch.between.the.wall.and.screw.heads.for.
mounting.the.phone.
2) Refer.to.the.steps.on.page.3.to.complete.the.mounting.process.
4