Wall.mounting.the.base - Uniden TRU9480 Series Owner's Manual

Wall.Mounting.the.Base

This.phone.can.be.mounted.on.any.standard.wall.plate..
) Make.the.AC.adapter.and.the.telephone.line.cord.through.the.hole.on.
the.wall.mount.adapter.
2) Plug.the.AC.adapter.into.the.DC.IN.9V.jack.
3) Plug.the.telephone.line.cord.into.the.TEL.LINE.jack.
4) Slide.the.wall.mount.adapter.into.the.notches.on.the.base.
5) Plug.the.AC.adapter.into.a.standard.20V.AC.wall.outlet..Hook.the.cord.
on.the.notch.of.the.wall.mount.adapter.
6) Plug.the.telephone.line.cord.into.the.telephone.outlet..Hook.the.cord.on.
the.notch.of.the.wall.mount.adapter.
7) Align.the.mounting.slots.on.the.base.with.the.mounting.posts.on.the.
wall. Then push in and down until the phone is firmly seated.
Note:.DO.NOT.use.an.AC.outlet.controlled.by.a.wall.switch.
3
To remove, push up To remove, push up
a tab on the wall a tab on the wall
mount adapter as mount adapter as
shown. shown.