Setting.the.number.of.rings - Uniden TRU9480 Series Owner's Manual

Setting.the.Number.of.Rings

The.ring.time.setting.allows.you.to.set.the.number.of.rings.the.caller.hears.before.your.answering.machine.plays.the.
outgoing.message..You.can.set.the.ring.time.to.answer.after.two,.four,.or.six.rings..If.you.enable.the.Toll.Saver.(TS.
setting),.the.answering.machine.picks.up.after.two.rings.if.you.have.new.messages,.and.after.four.rings.if.there.are.
none..This.way,.if.you.make.a.long.distance.call.to.check.your.messages,.you.can.hang.up.after.the.second.ring.to.
avoid.long.distance.billing.charges.
From.the.base
) Press.[clock/menu].three.times..The.base.
displays.the.current.number.of.rings.(2,.4,.6,.or.
TS.for.toll.saver).and.announces.the.setting.
2) Press.[ /select].or.[
ring.time.appears.
3) Press.[set]. A confirmation tone sounds, and
the.answering.machine.announces.the.new.ring.
time..
/select].until.the.desired.
From.the.handset
) Press.the.MENU.soft.key..Select.the.ANSW..
SETUP.menu,.and.then.the.RING.TIME.
submenu.
2) Move.the.cursor.to.select.a.Ring.Time.(2.TIMES,.
4.TIMES,.6.TIMES.or.TOLL.SAVER).
3) Press.the.OK.soft.key..You.will.hear.a.
confirmation tone.
54