Installing.the.rechargeable.battery - Uniden TRU9480 Series Owner's Manual

Installing.the.Rechargeable.Battery

Use.only.the.Uniden.BT-446.rechargeable.battery.pack.supplied.with.your.cordless.telephone..
Follow.the.steps.below.to.install.a.battery:
) Press in on the handset battery case cover (use the finger indention for a better grip) and slide the cover
downward.to.remove..
2) Plug.the.battery.cable.into.the.battery.jack..Be.sure.to.match.the.red.and.black.wires.to.the.label.near.the.
jack..The.cable.should.snap.into.place..Gently.pull.on.the.battery.cable..If.the.battery.connector.comes.lose,.
try.connecting.again.until.the.battery.snaps.into.place..
3) Place.the.battery.case.cover.back.on.the.handset.and.slide.it.upwards.until.it.clicks.into.place..
5