Campbell CELL200 Series Product Manual page 85

4g lte cellular module
Hide thumbs Also See for CELL200 Series:
Table of Contents

Advertisement

show rev
show roaming
show rsrp
show rsrq
show rssi
show sdc
show sdc term
show serial
show settings
show sms log
show smssca
show state
show state num
show time
show trusted 1
show trusted 2
Returns the revision of the CELL200 series OS.
Displays the current setting for the modem roaming capabilities.
Returned values are Auto and Disabled . Corresponds to the
Roaming setting in the cellular module web interface
Returns the modem LTE network signal strength (RSRP).
Returns the modem LTE network signal quality (RSRQ).
Returns the modem 3G signal strength information (RSSI).
Displays the current setting for the modem SDC address. Values are
7 , 8 , 10 , or 11 . This value corresponds with the CS I/O Port SDC
Address setting in the cellular module web interface.
Returns the current value for the SDC terminal interface in the
modem. Returned values are 7 , 8 , 10 , and 11 . Corresponds to the
Terminal Port CS I/O SDC Address setting in the cellular module
web interface
Returns the serial number of the modem.
Returns all the settings of the cellular modem.
Returns a log of SMS messaging logs.
Returns the modem SMSSCA (SMS Service Center Address)
number.
Returns the modem state in English. Values returned could include
(but not limited to) "Power off.", "Powering up.", "Powered up.",
"SIM authorized.", "Setting baud rate.", "Waiting for baud rate.",
"Baud rate set.", "Baud rate failure.", "Power off. Waiting for retry.",
"Powered up. SIM auth failure.", "Querying modem.", "Waiting for
network registration.", "Configuring modem.", "Dialing.", "Dialing
(retry).", "Dialed.", "PPP negotiation.", "Network ready.", "PPP
closing.", "PPP paused.", "PPP dropped.", "Terminal AT command
mode.", "Firmware update mode.", "Shutting down."
Returns the state number associated with show state values.
Returns the modem current time. Time returned by the modem is
set by the cellular network.
Returns the address or DNS Name in the 1st field of the cellular
module Trusted IP Host setting.
Returns the address or DNS Name in the 2nd field of the cellular
CELL200-Series 4G LTE Cellular Module
81

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cell205Cell210Cell215Cell220Cell225

Table of Contents