Campbell CELL200 Series Product Manual page 28

CELL200 series modem unless discrete crossarm-mounted antennas are required.
When installed by field technicians, only basic tools are required such as step drill
bits or hole saws. The antenna forms a waterproof seal against the enclosure
preventing moisture or dust ingress.
ANT 6.5DB-4GX-N: This is a crossarm mounted outdoor omnidirectional single-
o
element antenna suitable for use with 3G and 4G devices including LTE Band 28, also
known as Telstra 4GX. Nominal gain is about 6.5 dBi.
This is a single-element antenna; therefore, two will be required – one for Cellular
and one for Diversity. Check what frequencies are available in your area and separate
the antennas according to Recommended antenna separation (p. 30).
Only basic sockets and tools are required for installation.
CELL200-Series 4G LTE Cellular Module 24