Campbell CELL200 Series Product Manual page 39
4g lte cellular module
Hide thumbs
Also See for CELL200 Series:
- Product manual (92 pages) ,
- Quick deploy manual (4 pages) ,
- Application note (19 pages)
Table of Contents
Advertisement
5. Leave the default settings for the PakBusPort. PakBus Port Always Open should not be
checked. Enter the TCP Password; this must match the value entered in the Konect PakBus
Router setup and LoggerNet setup.
6. Select the pbRouter in the Network Map and set the PakBus Address to 4070.
CELL200-Series 4G LTE Cellular Module
35
Advertisement
Table of Contents
