Campbell CELL200 Series Product Manual page 69

NOTE:
This section applies to modules set up in serial server mode with a public static IP account
when connecting over the Internet using the cellular interface.
This section also applies to all modules when connecting via USB.
1. Connect the Cellular antenna.
2. Connect the Diversity antenna, if used. (Not required. See
3. (Option 1, local connection) Connect a USB cable between your module and computer.
a. Open a web browser and go to: cell.linktodevice.com.
TIP:
If your computer does not respond to the DNS server correctly, browse to
192.168.86.1.
4. (Option 2, remote connection) No additional setup for modules connecting remotely.
a. Open a web browser and enter the module static IP address.
5. Every 14 days, the module automatically checks for a CELL200 series OS update. When a
new OS is available you will see a red notification in the Version field of the Status Tab.
Antenna connections
CELL200-Series 4G LTE Cellular Module
(p. 28).)
65