NOTE:
Setup has two options, EZ (simplified) and Standard. Click on the View menu at the top of
the Setup screen, and select Standard view.
From the LoggerNet toolbar, click Main > Setup and configure the Network Map as described in
the following steps:
1. Select Add Root > PakBusTcpServer.
2. Add a data logger to the PakBusTcpServer.
3. Select the PakBusTcpServer in the Network Map. PakBus Port Always Open should be
checked.
4. Select the data logger in the Network Map. Select Call-Back Enabled; the box should have
a check.
CELL200-Series 4G LTE Cellular Module
.
54