Campbell CELL200 Series Product Manual page 49

TIP:
If this doesn't work browse to 192.168.86.1.
4. On the Settings tab, enter the APN provided by your cellular provider.
5. On the General tab, set Mode to Serial Client.
6. When using a CR200(X), set RS-232 baud rate to 9600 baud.
7. Select the Serial Mode Setup tab.
8. Enter the URL and Port Number of the server/device that the module will connect to.
9. (Optional) Select Always Open for the Timeout .
CELL200-Series 4G LTE Cellular Module 45