Campbell CELL200 Series Product Manual page 23

5. For PakBus data loggers, leave the default settings for the PakBusPort. PakBus Port Always
Open should not be checked. If used, enter the TCP Password.
6. For PakBus data loggers, select the data logger in the Network Map and set the PakBus
Address to match that of the data logger (default address in the data logger is 1). If a
PakBus Encryption Key was entered during data logger setup, also enter it here. Click Apply
to save the changes.
CELL200-Series 4G LTE Cellular Module 19