Using The Intercom - Uniden UIP 160P Series Owner's Manual

Using the Intercom

If you have two or more handsets, you can use them as an intercom.
1) In standby mode, press intcom/hold.
2) Select the handset you want to talk with within 30
seconds. To select the handset, press cid/vol/
∨
redial/p/vol/ , and then press the OK soft key. If you
select , all other handsets will be paged. An
Al l
intercom tone sounds.
To cancel intercom, press the CANCEL soft key on the initiating handset.
3) To answer the page, press talk/flash, intcom/hold, or
the ANSWER soft key. If Any Key Answer is enabled,
pressing a number key,
the page. If AutoTalk is enabled, you can answer the
page by simply picking up the handset.
4) To hang up the intercom call, press end or the END soft key on either handset.
w w w . u n i d e n . c o m
∧
< >
/tone/ , or #/ will answer
*
or
M U L T I - H A N D S E T F E A T U R E S [ 5 4 ]
note
If the party is busy or
out of range, the
handset returns to
standby mode.