Adjusting The Earpiece And Speaker Volume; Temporarily Muting The Ringer - Uniden UIP 160P Series Owner's Manual

Storing a Redial Record
1) With the phone in standby mode, press redial/p/vol/
∧
2) Press cid/vol/ or redial/p/vol/
3) Press the EDIT soft key, then select
4) To complete the setting, follow the steps 3-8 in "Phonebook (Storing Phone
Numbers, Names, Distinctive Rings, and Speed dial)" on page 38-39.

Adjusting the Earpiece and Speaker Volume

You can select from among six volume levels on the
handset. Pressing the volume up key or volume down
key during a call will change the earpiece or speaker
volume. This setting will remain in effect after the
telephone call has ended.
If you press the volume up key when the earpiece is at
the maximum volume level, an error tone sounds.
The error tone also sounds if you press the volume
down key at the lowest volume.

Temporarily Muting the Ringer

You can mute the ringer individually on a handset. When the phone is ringing, press
end or the MUTE soft key on the handset you want to mute. This mute will last for
the current incoming call only. The ringer tone will return to the previous setting
on the next incoming call.
w w w . u n i d e n . c o m
∨
.
∨
repeatedly to display the number to be stored.
, and then OK soft key.
S to r e in t o P B?
note
While charging a
handset, you can not
mute the ringer tone
for the handset.
U S I N G Y O U R P H O N E [ 3 4 ]