Uniden UIP 160P Series Owner's Manual page 51

Talk mode
1) When the phone is in talk mode, select the Caller ID record you want to dial (see
"Viewing the Caller ID List" on page 47).
2) Press the soft key, and the number will be dialed.
DIAL
Storing Caller ID records in the Phonebook
Records shown in the Caller ID list can be stored in the phonebook. The phone
number and name of the party listed on the Caller ID record can be stored in the
phone book without reentry.
1) When the phone is in standby mode, select the Caller ID message to be stored.
Press the EDIT soft key and use volume up/down to select
then press the OK soft key.
already stored in memory, you will hear a beep and
appears. The number will not be stored.
s t or e d! !
2) To complete the setting, follow the steps 3-8 in "Phonebook (Storing Phone
Numbers, Names, Distinctive Rings, and Speed dial)" on page 38-39.
w w w . u n i d e n . c o m
St o re / Ed i t Na m e
C A L L E R I D A N D C I D C W ( C A L L E R I D O N C A L L W A I T I N G ) [ 5 0 ]
s to r e i nt o P B?
appears. If the Caller ID message is
Th i s d at a i s a lr e ad y
note
•When a long distance call
1
has been set, " " appears
in the display.
•If the Caller ID message
was received as a private/
unknown number, or the
message does not have
the number, you cannot
, and
store the message in the
phonebook. If it was
received as private/
unknown name, the
message will be stored as
<No Name>.
•If all 100 memory entries
are full, the Caller ID
message will be erased
from Caller ID list when
you store it in the
phonebook.