GRAUPNER GR-18 Series Manual page 6

Symbols explication
!
Safety notes
!
6 - 24
Always follow the information marked with the CAUTION or WARN-
ING symbol. The signal word WARNING indicates the potential for
serious injury, the signal word CAUTION
lighter injuries.
The signal words note and caution indicate potential damages to
objects.
General
These safety instructions are intended not only to protect the
product, but also for your own and other people's safety. There-
fore please read this section very carefully before using the prod-
uct!
Do not carelessly leave the packaging material lying around,
since it might become a dangerous toy for children.
 Persons, including children, with reduced physical, sensory
or mental capabilities, or lack of experience or knowledge,
or not capable to use safely the receiver must not use the
receiver without supervision or instruction by a responsible
person.
 Operation and use of radio-controlled models needs to be
learnt! If you have never operated a model of this type before,
start carefully and make yourself familiar with the model's
reactions to the remote control commands. Proceed respon-
sibly.
 First, always perform a range and function test on the ground
(to do so, hold your model tight), before you use your model.
Repeat the test with running motor and with short throttle
bursts.
 Before you start using the remote control model, you have
to check the further relevant laws and regulations. These
laws you must obey in every case. Pay attention to the pos-
sibly different laws of the countries.
 The insurance is mandatory for all kinds of model operation.
If you already have one, please inform yourself if the opera-
tion of the respective model is covered by your insurance. If
this is not the case, conclude a special liability insurance pol-
icy for models. We recommend to provide the copter with a
label, where are indicated the name, address, tel. n., E-mail
and Insurance N. So that the copter can be clearly assigned
in the event of a crash.
indicates possibility of
GR-18_3D_jh_V1