GRAUPNER GR-18 Series Manual page 5

Hott receiver with firmware for racecopter, copter without gps supported mode, 3d copter
Table of Contents

Advertisement

Intended use
Package content
Declaration of conformity
33579 Receiver GR-18
S1019 Receiver GR-18L
GR-18_3D_jh_V1
The receiver is only suitable to be installed on multicopter mod-
els. More punctual information about receiver can be found in
the Technical data section.
The receiver is designed exclusively to be used in battery-pow-
ered, radio controlled models, any other use is not allowed. For
any improper use no warranty or liability is accepted.
Read through this entire manual before you attempt to install or
use the receiver.
Graupner/SJ constantly works on the development of all prod-
ucts; we reserve the right to change the item, its technology and
equipment.
Target group
The product is not a toy. It is not suitable for children under 14
years. The installation and operation of the receiver must be per-
formed by experienced modellers. If you do not have sufficient
knowledge about dealing with radio-controlled models, please
contact an experienced modeller or a model club.
 33579 Receiver GR-18 or S1019 Receiver GR-18L
 Manual
Graupner/SJ declares that the product is conform to EU norms.
EN 301 489-1 V1.9.2 EN 301 489-17 V2.2.1
EN 300 328 V1.8.1
EN 60950-1+A11+A1+A12+A2:2013
EN 62311:2008
5- 24

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gr-18Gr-18l33579S1019

Table of Contents