Additional Information; Changing The Digital Security Code - Uniden EXLI 8962 Owner's Manual

Additional information

Changing the digital security code

The digital security code is an identification code used to connect the handset and the
base unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set. (See page
4.)
In the rare situation that you suspect another cordless telephone is using the same
security code, you can change the code.
Note
If the handset battery pack is completely discharged or the battery pack removed, the
digital security code will be lost.
If this happens, a new security code is set automatically the next time the battery pack
is charged.
1
Remove the handset from the base
unit. Press page/find
2
While the handset is producing the
paging sound, hold
placing the handset in the base unit.
The paging tone stops.
Leave the handset on the base.
A random, new security code is set.
.
while
page/find
39