Table of Contents
Advertisement
Caller ID
(continued)
Storing Caller ID messages in Memory dialing
Messages shown in the Caller ID list can be stored in memory dialing.
Using the incoming call information (i.e., Caller ID list), the phone number of the party
on the Caller ID list can be stored in memory dialing.
Notes
• If a message has already been stored in the select-
ed memory numbers location, a verification screen
is displayed.
Press
or
•
ª
Press
select/ch
to overwrites. The display returns to the Caller ID list.
• Caller ID lists for which phone numbers are not displayed cannot be stored in mem-
ory dialing. You can not store a Caller ID message if no phone number appears in the
message.
• If no key is pressed for more than 20 seconds, an error tone sounds and the telephone
returns to the standby mode.
• If there is an incoming call or paging, memory storage is cancelled and the telephone
is set to the incoming call or paging. If you get an incoming call, memory storage is
cancelled.
to select "Yes".
1
Select the phone number to be stored
from the Caller ID list. (See page 33.)
5/17 12:30PM 03
UNIDEN CORP
817-858-3300
2
mem
Press
.
Select Location
01 UNIDEN CORP
02 JONE DOE
3
Press
or
•
ª
message you want to store.
Press the dial buttons (
and select the number (01 to 20).
4
Press
select/ch
A beep tone will sound. The number is
stored in memory, and the display
returns to the Caller ID list.
5/17 12:30PM 03
UNIDEN CORP
817-858-3300
Replace Memory ?
Yes
No
to select the
to
)
0
9
.
37
Advertisement
Table of Contents
