Step 2: Setting Up The Base Unit - Uniden EXLI 8962 Owner's Manual

Uniden cordless telephone owner's manual exli 8962
Table of Contents

Advertisement

Step 2
Setting up the base unit
Do the following steps.
• Choose the best location
• Connect the base unit
• Choose the dialing mode
Choose the best location
Before choosing a location for your new phone, read the INSTALLATION CONSIDERA-
TIONS included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS
brochure. Here are some important guidelines you should consider:
Avoid heat sources, such as
radiators, air ducts, and sunlight
Avoid television sets
and other electronic
equipment
Choose a central location
• You should charge your handset for 15-20 hours before using the phone.
• The location should be close to both a phone jack and a continuous power outlet
which is not switchable.
• Keep the base and handset away from sources of electrical noise such as motors and
fluorescent lighting.
• Be sure there is sufficient space to raise the base antenna fully vertical.
• The base can be placed on a desk, tabletop or mounted on a standard wall plate.
• If your second phone line has a separate jack, place your phone so you can access
both jacks.
6
Avoid noise sources such as a window by a
street with heavy traffic
Avoid microwave oven
Avoid other cordless telephone
Avoid excessive
moisture, extremely low
temperatures, dust,
mechanical vibration, or
shock
Avoid personal
computers

Advertisement

Table of Contents
loading

Table of Contents