Table of Contents
Advertisement
Additional information
Mounting the base unit on a wall
[Standard wall plate mounting]
This phone can be mounted on any standard AT&T or GTE wall plate.
1
2, 3, 4,
5, 6, 7
Wall plate
AC outlet
40
AC adapter
1
Snap the wall mount adapter into the
notches on the base.
2
Plug the telephone line cord to the
TEL LINE jack and the AC adapter to
the DC IN 9V jack.
3
Plug the telephone line cord into the
telephone outlet.
4
Wrap the AC adapter cord inside the
molded wiring channel. Then wrap
the cord around the strain relief notch.
5
Plug the AC adapter into a standard
120VAC wall outlet.
6
Raise the antenna to a vertical
position.
7
Align the mounting slots on the base.
with the mounting posts on the wall.
Push in and down until the phone is
firmly seated.
Advertisement
Table of Contents
