Additional Information; Changing The Digital Security Code - Uniden EXI2926 Owner's Manual

note
If the handset battery
pack is completely
discharged or the
battery pack is removed,
the digital security code
will be lost.
If this happens, a new
security code is set
automatically next time
the battery pack is
charged.
[ 46 ] A D D I T I O N A L I N F O R M A T I O N

Changing the Digital Security Code

The digital security code is an identif ication code used to connect the handset
and the base unit. Normally, setting the code is not necessar y.
The f irst time you charge your handset, the security code is automatically set.
(See page 6.) In the rare situation that you suspect another cordless telephone is
using the same security code, you can change the code.
1) Remove the handset from the base unit.
2) Press and hold intercom on the base.
3) While the handset is emitting the paging sound place
the handset on the base unit. While holding intercom,
leave the handset on the base for more than 5 seconds.
A random, new security code is set.