Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Uniden EXP 971 Series
Summary of Contents for Uniden EXP 971 Series
-
Page 2: Controls And Functions
The Uniden 900MHz cordless phones are designed and engineered to exacting standards for reliability, long life, and outstanding performance. NOTE: Some illustrations in this manual may differ from the actual unit for explanation purposes. The color of your cordless phone may vary. -
Page 3: Setting Up The Phone
Included with Your Phone • Base • Handset Replacement adapters, batteries and other parts may be purchased on Uniden’s website www.uniden.com, or be contacting Uniden’s Parts Department (see page 3). Do the following steps: A. Choose the best location B. Install the rechargeable battery pack into the handset... -
Page 4: Low Battery Alert
4) Place the handset in the base with the keypad facing forward. NOTE: For optimum performance use only the Uniden Battery (BT-904) supplied with your phone. Replacement batteries are also available through the Uniden Parts Department at (800) 554-3988, Monday through Friday from 8:00 a.m. to 5:00 p.m. -
Page 5: Choose The Dialing Mode
4) Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and a telephone outlet. TIP: If your telephone outlet isn’t modular, contact your telephone company for assistance. D. Choose the dialing mode Most phone systems use tone dialing which sends DTMF tones through the phone lines. -
Page 6: Adjusting The Ringer And Earpiece Volume
Throughout this manual, terms such as Standby and Talk Mode are used. Below is the terminology explanation. • Talk Mode - The handset is off the base and the talk key has been pressed, enabling a dial tone. • Standby Mode - The handset may be sitting in or off the base, but is NOT in use. The talk key has not been pressed and there is no dial tone. -
Page 7: Find Handset
To locate the handset (while it’s off the base), press the find hs key on the base. The handset beeps for 60 seconds. Paging is canceled when pressing any handset key, the find hs key on the base or the handset is returned to the base. -
Page 8: Chain Dialing
One-touch RocketDial Your phone is equipped with “One-touch RocketDial” for instant dialing. It is used to dial the phone number stored in the one-touch RocketDial location (See “Storing a Phone Number in Memory Dial”). To instantly dial the phone number stored in the one-touch RocketDial location, simply press the RocketDial key in standby mode. -
Page 9: Troubleshooting
After following these steps, if your cordless telephone does not work, please send to: Uniden America Corporation Parts and Service Division 4700 Amon Carter Blvd. Ft. Worth, TX 76155 1-800-554-3988. -
Page 10: Important Safety Instructions
• Through the RBRC® program, Uniden makes it easy for you to drop off the used battery at local retailers of replacement nickel-cadmium batteries. You may also contact your local recycling center for information on where to return the used battery. -
Page 11: Installation Considerations
This type of installation is not difficult; however, you should contact your Uniden telephone dealer or a telephone supply store for advice about the proper adapter or converter for your particular situation. Connecting the Telephone Cords... -
Page 12: One Year Limited Warranty
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below.
Need help?
Do you have a question about the EXP 971 Series and is the answer not in the manual?
Questions and answers