Receiving Calls - Uniden EXLI 8962 Owner's Manual

Receiving calls

flash
4
Press
talk
when the telephone call is finished. The call
time will be displayed for about 5 seconds.
Auto Talk when ringing
When the Auto Talk setting is on and there is an incoming call, simply lift the handset
from the base unit to answer the phone. (See page 31.)
Any key when ringing
When the Auto Talk setting is on, and the handset is on the base, press any handset
key (except
mute/ring
Mute when ringing
Press mute/ring
The handset rings normally with receipt of the next call.
Any key when paging
To cancel paging, press any of the handset keys while the handset is beeping. (See
page 30.)
Caller ID reception
When a call is received during a telephone call already in progress, the handset enters
call waiting mode and Caller ID data displays.
Press
flash
16
mute/ring
or place the handset on the base
) to answer the incoming call. (See page 31.)
when the phone rings to mute the ringing sound.
— Note: You must subscribe to Call Waiting service from your local
phone company to use this feature.
to switch to the new call. (See page 38.)
1
Phone rings.
Calling
2
Press . "Talk" and volume
talk
appears on the display.
Talk
3
The call-time display starts. Talk with
the caller.
Talk 0:02
115:35