Additional Information; Changing The Digital Security Code - Uniden WDECT 2310 Quick Start Manual

Hide thumbs Also See for WDECT 2310:

Table of Contents

All manuals and user guides at all-guides.com

UP306EH (WDECT2310) ENG OM

1/21/04

The digital security code is an identification code used to connect the handset and the

base unit. Normally, setting the code is not necessary. In the rare situation that you

suspect another cordless telephone is using the same security code, you can change the

code. To change the digital security code:

1. Perform the "System Reset" menu options ("Deregister the Handset" and

"Deregister the Base Setting") for the handset you have (see page 19).

2. To register the handset do the following steps:

1) Place a handset in the base.

2) Registration starts automatically.

While registering "Handset Registering" appears in the display.

3) When the registration is complete, "Registration Complete" appears in

the display.

If the registration fails, "Registration Failed" appears in the display. Try the steps

above again.

8:53 AM

Page 39

[ 39 ]

Table of Contents