Source Audio EQ2 Programmable EQ User Manual page 29

•
Save As Button: After creating a new preset hit the Save As button and you will be prompted
to name it and select the preset or Effect Selector position to which it will be saved.
•
Save Button: If you have made edits to a pre-existing preset, use the Save button to update
the preset without changing its name or preset position.
•
Export Button: Use the Export button to save a preset on your computer or share it with
other musician. Presets are saved as .pre files and stored anywhere on your computer (we
recommend creating a dedicated folder to store your presets). After creating a preset, hit
the Export button - a window will pop up, asking you to name, tag, and select a location for
the preset. After the preset is saved, the .pre file can be shared via email or any common file
sharing method.
•
Import Button: Use the Import button to upload saved .pre files to your Neuro Desktop
Editor. Upon clicking the Import button you will be asked to find the .pre file. Simply go to
your Neuro presets folder, select file, and upload.
•
Refresh Button: Hit the Refresh button to restore the Neuro Desktop edits to the state
immediately after your last save procedure.
•
Hardware Presets: This is where all of your pedal presets are listed. Use the Save As button
to select where you would like to store an edited preset - you can choose from any of the
128 preset positions or the 12 Effect Selector knob positions on the EQ2 Programmable EQ.
SA270 EQ2 User Guide 29