Additional Features - Source Audio EQ2 Programmable EQ User Manual

preset normally. When recalled, the pedal will load the saved user settings, but the effects will be
bypassed until you engage the pedal.
Copying a Preset to a New Location Using the Select/(Hold) Save Button
1. Select the preset you would like to copy by pressing the SELECT Button until the corresponding
P LED is lit.
RESET
2. Press and hold the SELECT Button for one second until the corresponding P
blinking rapidly. Quickly release the SELECT Button. The P
rapidly. This indicates that the EQ2 is in copy mode.
3. Tap the SELECT Button to increment the preset. The corresponding P
to blink rapidly. Tap the SELECT Button again until the desired copy destination is selected.
4. Press and hold the SELECT Button until the P
indicates that the preset has been saved to the new location. The original location will not be
changed or overwritten.
Copying a Preset to a New Location Using an External MIDI Controller
1. Select the preset you would like to copy by sending a MIDI program change message to the
EQ2.
2. Press and hold the SELECT Button for one second until the corresponding P
blinking rapidly. Quickly release the SELECT Button. The P
rapidly. This indicates that the EQ2 is in copy mode.
3. Send a desired MIDI Program Change number to indicate the desired copy destination for the
preset.
4. P LED will blink fast and then turn solid. This indicates that the preset has been saved to
RESET
the new location.
Copying a Preset to a New Location Using the Neuro App
Using the BURN command in Neuro Mobile or Desktop Editors, it is possible to copy presets to any
location in memory.
Clearing all Presets
All 128 User Presets can be erased using the Factory Reset procedure. Warning: the Factory Reset
procedure resets the entire pedal back to the state in which it was originally shipped – this includes
all global settings and User Presets. A Factory Reset will not erase any firmware updates.

Additional Features

Along with complete equalization control and complex routing options, EQ2 packs a few more
features for the ultimate tone-shaping experience.
Noise Gate
Accessible by the Options menu (see
gate is available for reducing any noise from your signal up to a certain dB threshold. More noise
gate options are available in the
SA270
LED blinks slowly and then turns solid. This
RESET
Basic Operation for details on how to access), an optional noise
Neuro App and Neuro Desktop
EQ2 User Guide
LED begins
RESET
LED should continue to blink
RESET
LED should continue
RESET
LED begins
RESET
LED( ) should continue to blink
RESET S
Editor.
19