Text Messaging Service; Sending A Quick Text Message - Motorola APX 8000H User Manual

Hide thumbs Also See for APX 8000H:
Table of Contents

Advertisement

MN004476A01-AE
Chapter 6: Advanced Features
6.12

Text Messaging Service

Text Messaging Service (TMS) allows you to send and receive messages and run database queries
directly from your radios. The maximum number of characters allowed for a text message is 200
characters.
The types of text messages available are:
A predefined message (quick text message).
An edited quick text message.
A query (ASTRO 25 Advanced Messaging Solution).
NOTICE: Query is only supported in the ASTRO 25 Advanced Messaging Solution. For more
information, see
ASTRO 25 Advanced Messaging Solution on page 81
Authentication on page
6.12.1

Sending a Quick Text Message

When and where to use:
Quick Text messages are messages that are predefined and usually consist of messages that are
used most frequently.
Each Quick Text message has a maximum length of 50 characters. You can select the required text
from the Quick Text.
Procedure:
1 Perform one of the following actions:
To access this feature using the preprogrammed button, press the preprogrammed Quick
Text button and proceed to
To access this feature using the menu, proceed to the next step.
2
or to TMS and press the Menu Select button directly below TMS to access the TMS feature
screen.
3 Perform one of the following actions:
or
to Compose and press the Menu Select button directly below Sel .
Press the Menu Select button directly below Exit to return to the Home screen.
4
or
to Quick Text and press the Menu Select button directly below Sel for a predefined
message.
5
or
to scroll through the list of messages and press the Menu Select button directly below
Sel to select the required message.
The message appears on the Compose screen, with a blinking cursor at the end of it.
6 Press the Menu Select button directly below Optn .
7
or
to Send Message and press the Menu Select button directly below Sel .
8
or
to scroll through the address list and select the required address.
The message is sent after the address is selected.
76
81.
step
4.
and
Two-Factor

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apx 6000 3Apx 6000li 32.5

Table of Contents