Clearing All Bluetooth Devices Information - Motorola APX 8000H User Manual

Hide thumbs Also See for APX 8000H:
Table of Contents

Advertisement

MN004476A01-AE
Chapter 6: Advanced Features
2
or
to Devices.
Once the display highlights the Devices, the display shows XX connected alternates with XX
paired.
3 Press the Menu Select button directly below Sel.
4 If there are devices being paired or connected,
Name> to see the status of each device.
If there are no active Bluetooth devices being paired or connected, the display shows No
devices.
5 Perform one of the following actions:
To clear the device from the list,
button directly below Clr.
To exit from this function, press the Menu Select button directly below Back to return to the
previous screen without deleting the device name.
If Clr is selected, the display shows <Device Friendly Name> clear?.
6 Press the Menu Select button directly below Yes or No to proceed delete the device or to exit
this function and return to previous screen.
If the device is deleted successfully, the display shows <Device Friendly Name> cleared to
indicate clearing is successful.
If the device is not deleted successfully, you hear the radio sounds a short, low-pitched tone. The
display shows <Device Friendly Name> clear failed. The display returns to previous screen.
Postrequisites:
NOTICE: If Re-Pair Timer is set to infinite and you clear keys on the radio, you must clear keys
on all previously paired devices as well. (Please see your Accessories manual for further
details.)
6.19.10

Clearing All Bluetooth Devices Information

When and where to use: Do one of the following to clear all Bluetooth devices information. You can
use the options interchangeably depending on your preference and the programmed functions.
Procedure:
Clearing all Bluetooth devices information using the preprogrammed Bluetooth On/Off button:
a. Long press the preprogrammed Bluetooth On/Off button.
You hear a short, medium-pitched tone. The display shows Please wait to indicate
clearing is in progress.
If successful, the display shows All BT devices cleared.
If unsuccessful, the radio sounds a short, low-pitched tone. The display shows Clear all
BT devices failed. The display returns to Bluetooth feature screen.
Clearing all Bluetooth devices information using the radio menu Clr:
a.
or
to Devices and press the Menu Select button directly below Clr.
You hear a short, medium-pitched tone. The display shows Clear all BT devices?.
106
or
along the list of <Device Friendly
or
to the required device, press the Menu Select

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apx 6000 3Apx 6000li 32.5

Table of Contents