Table of Contents
Advertisement
NOTICE: The radio plays this alert tone even in Surveillance Mode.
When the alert tone is active, changing to another channel with a different setup triggers a different
response from the radio:
•
The alert tone is inhibited when you change to a channel without Emergency feature.
•
The alert tone is inhibited when you change to a channel with Emergency but no Man Down
feature.
•
The current alert tone is inhibited and is replaced with a different alert tone when you change to a
channel with Emergency feature and a different Man Down configuration.
•
The alert tone continues when you change to a channel with Emergency and similar Man Down
configuration.
6.10.2
Testing the Man Down Feature
Prerequisites: Ensure that Man Down is configured on your radio.
Procedure:
1 Turn on the radio and place it in a vertical position for at least five seconds.
2 Lay the radio down in a horizontal position.
The radio plays an alert tone and the display shows Man-Down.
Postrequisites: If Man Down is configured but the condition does not trigger the activation of the
feature, send the radio to a qualified technician.
6.10.3
Exiting Man Down
Procedure:
To exit Man Down mode, press Clr.
6.10.4
Re-Initiating Man Down
Procedure:
To re-initiate Man Down after exiting Emergency Operation, perform one of the following actions:
•
Return the radio to a vertical position.
•
If motion sensitivity is enabled, shake the radio.
6.11
Automatic Registration Service
Automatic Registration Service (ARS) provides an automated data application registration for the radio.
When you turn on the radio, the device automatically registers with the server. Data applications within
the fixed network determine the presence of a device on the system and send data to the device.
The ARS for the radio consists of two modes:
•
ARS Server Mode (default mode)
MN004476A01-AE
Chapter 6: Advanced Features
73
Advertisement
Table of Contents
