Table of Contents
Advertisement
5.4.2
Receiving and Responding to a Private Call (Trunking Only)
When and where to use:
A Private Call is a call from one individual radio to another.
Other users in the current talkgroup cannot hear the one-to-one call between the two radios. The
calling radio automatically verifies that the receiving radio is active on the system and can display the
caller ID.
NOTICE: With the inactivity timer enabled (optional), when there is no response from the
receiving radio, the calling radio exits the call with Menu Inactive Exit tone after the timer
expires.
When you receive a Private Call, you hear two alert tones and the LED blinks green. The display
shows Call received and the call received icon blinks.
Procedure:
1 Perform one of the following actions:
•
Press the Menu Select button directly below Resp.
•
Press the Call Response button within 20 seconds after the call indicators begin.
If the caller alias is in the call list, the display shows the caller alias during the call.
If the caller name is not in the call list, the display shows the caller ID.
2 Press and hold the PTT button to talk. Release the PTT button to listen.
3 Press
or the Call Response button to hang up and return to the Home screen.
See also
Making a Private Call (Trunking Only) on page 46
5.4.3
Receiving and Responding to a Telephone Call (Trunking Only)
When and where to use:
This feature allows you to receive calls similar to standard phone calls from a landline phone.
NOTICE: With the inactivity timer enabled (optional), if there is no response to the call after the
timer expires, your radio exits the call with Menu Inactive Exit tone.
When you receive a Telephone Call, you hear a telephone-type ringing and the LED blinks green. The
backlight of the screen and the bar turns green.The display shows Phone call and the call received
icon blinks.
Procedure:
1 Press the Call Response button within 20 seconds after the call indicators begin.
2 Press and hold the PTT button to talk. Release the PTT button to listen.
3 Press
or the Call Response button to hang up and return to the Home screen.
See also
Making a Telephone Call (Trunking Only) on page 47
Call.
5.5
Methods to Make a Radio Call
You can select a zone, channel, subscriber ID, or talkgroup by using:
•
The preprogrammed Zone switch.
Chapter 5: General Radio Operation
for details on making a Private Call.
for details on making a Telephone
MN004476A01-AE
45
Advertisement
Table of Contents
