6.1.1
Using ViQi Virtual Partner
Prerequisites: See
ViQi on page 50
Procedure:
1 Press and hold the assigned ViQi button.
2 After you hear a tone, speak your request into the microphone.
3 Release the assigned programmable button and wait for ViQi to respond.
4 Throughout your session, repeat steps
Depending on your query, you can also say the following requests:
•
To play the available results, say "Play results".
•
To request for more details, say "More details".
•
To complete the Virtual Partner session, say "Complete".
6.2
Advanced Call Features
This chapter explains the operations of the call features available in your radio.
6.2.1
Selective Call (ASTRO Conventional Only)
A Selective Call is a call from an individual radio to another individual radio with privacy.
6.2.1.1
Receiving a Selective Call
When and where to use: When you receive a Selective Call, the radio indicates one of the followings:
•
You hear two alert tones and the LED lights up solid yellow to indicate the transmitting radio is still
sending signal. The call received icons blinks and the display shows Call received.
•
The LED blinks solid green once to indicate the transmitting radio is pending to receive signal.
The speaker unmutes.
Procedure:
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
2 Press and hold the PTT button to talk. Release the PTT button to listen.
6.2.1.2
Making a Selective Call
Prerequisites: Your radio must be preprogrammed for you to use this feature.
Procedure:
1 Perform one of the following actions:
•
To access this feature by using a preprogrammed button, press the preprogrammed Quick
Access (One-Touch) Selective Call button to dial the preprogrammed ID. Proceed to
3.
•
or to Call, and press the Menu Select button directly below Call.
for the queries supported by this feature.
step 1
through
step 3
MN004476A01-AE
Chapter 6: Advanced Features
when responding to ViQi.
step
51