Test The Connection - Uniden DECT4086-2 User Manual

Test the Connection

Pick up the handset from the base and press
pick up line 1 automatically and change the display to show Talk
and you should hear a dial tone.
When you get a dial tone, make a test call; press
If...
the base display says
Check or you don't hear a
dial tone
you keep hearing a dial
tone
there's a lot of noise or
static
the handset display says
Unavailable
Test Line 2
Once you can make calls on line 1, make a test call on the second
line. Pick up the handset and press the unmarked key under
You should hear a dial tone and the display should show Talk
SUN 12:00A SUN 12:00A
Handset #1 Handset #1
LINE1 LINE1 MENU MENU LINE2 LINE2
Test any accessory handsets the same way. If you can't get a dial
tone or the handset display says Unavailable, try moving the handset
closer to the base or resetting it (see page 44).
Try...
checking the connection between the
base and the phone jack: make sure
the cord is connected to
setting line 1 to pulse dialing (see page
6).
see page 42 for tips on avoiding
interference.
resetting the handset (see page 44). If
you have accessory handsets, try using
a different handset for the test call.
If...
the display says
Check or
you don't hear a
dial tone
you keep
hearing a dial
tone
. The phone should
TaLk
to hang up.
eND
Try...
checking the connection
between the base and the phone
jack: if you have a separate jack
for each line, make sure the
cord is connected to
setting line 2 to pulse dialing
(see page 6).
,
.
TEl lINE 1/2
LINe2 .
.
.
TEl lINE 2