Changing The Volume; Using The Caller Id And Redial Lists - Uniden DECT4086-2 User Manual

Changing the Volume

You can set the volume of the ringer and speaker separately for the
base and each handset; you can also set the earpiece volume on
each handset. The available volume levels and how to change them
are listed below; for each item, press
make it softer.
Change the
ringer volume
earpiece volume
speaker volume

Using the Caller ID and redial lists

You have to subscribe to Caller ID to use Caller ID features:
contact your telephone provider for more information.
Caller ID list information
-
When a call comes in, the phone displays the
caller's number and name (if available) along
with which line is receiving the call.
-
The phone saves the information for the last 50
calls received on either line to the CID list. The
phone records which line the call came in on.
-
When it's in standby, each station displays the
total number of calls received on both lines
since the last time you checked the CID list.
-
You can edit the list separately on each station.

When
the phone is in
standby
you are on a
normal call
you use the
speaker-phone
for a call or
getting messages
to make it louder or
up
on the base
select a line, then select Off, Low,
Medium, or High
Not available
choose one of 10
volume levels for
the active line
redial list information
-
Each station has its
own redial list.
-
The redial list contains
the last 10 phone
numbers dialed from
that station.
-
The redial list does
not record which line
was used to dial the
number.
DowN
on a handset
choose one of 6
volume levels for
the active line
choose one of 6
volume levels for
the active line
to