Getting Started – RAID Array 410 for HP-UX
1.4
Placing the SWXRA-Yx RAID Array 410
Use the following procedure to move the SWXRA-Yx to its designated site:
1. Roll the SWXRA-Yx enclosure to the desired location.
2. If required, engage the lock on each front caster to prevent the enclosure from moving.
1–4
To prevent damage to the SWXRA-Yx and injury to personnel,
make sure to provide a clear path for the casters.
WARNING
EK–SMRA3–IG. C01
Need help?
Do you have a question about the RAID Array 410 and is the answer not in the manual?