IBM Aptiva 2124 Hardware Maintenance Service page 308

Machine Type 2137 Monitor
And Power Cord, 9
Machine Type 2137 System
Unit - Exterior, 3
Machine Type 2138 Software,
24
Parts/Test Point Locations, 1
Password, 9, 19
PCI
IRQ Setting, 20
IRQ Sharing, 20
PIO Mode, 16
Plug and Play, 21
Reset Resource Assignments,
21
POST, 2
Power consumption, 23
Power Management, 4, 17
Modem Wake-Up on Ring, 18
Power Switch< 4 sec., 18
Power Supply, 5
Check Procedure, 37
Connector Specifications, 15
Error Symptoms, 22
Power Switch
Power Switch< 4 sec., 18
Processor
Error Symptoms, 14
Processors
Machine Type 2137, 2
Machine Type 2138, 2
R
Real-Time Clock
Error Symptoms, 19
Removals and Replacements
handling ESD-sensitive parts,
50
processor, 41
Removals and
Replacements(Machine Type
2137)
System Board, 24
Removals and
Replacements(Machine Type
2137), 2
Adapter Cards, 14
bay 4, 5 (3.5-In. Diskette/Hard
Disk Drives), 10
Bay Panels, 7
Bays 1, 2, 3 (5.25-In.
Internal/External Bays), 9
Cover, 5
Identifying the Parts of the
System Unit, 3
Indicator LED and Cable, 23
Memory(DIMM), 15
Processor, 16, 18
Removal Sequence, 3
System Backup Battery, 22
Removals and
Replacements(Machine Type
2138)
Adapter Cards, 39
Bay 4, 5 (3.5-in. Diskette/ Hard
Disk Drives), 35
Bay Panels, 32
Identifying the Parts of the
System Unit, 27
Indicator LED and Cable, 47
Power Supply, 13, 37
System Backup Battery, 46
System Board, 48
Removals and
Replacements(Machine Type
2138), 26
Bays 1, 2, 3 (5.25-In.
Internal/External bays), 34
Cover, 29
Memory(DIMM), 40
Pentium II Processor Heat Sink
and Fan, 43
Pentium II Processor Module,
41
Removal Sequence, 27
Repair Information, 1
Index I-3