Startup Options; Date And Time; Advanced Options - IBM Aptiva 2124 Hardware Maintenance Service

NOTE: These Power Management settings do not work in Windows 98.
Use the Control Panel Power utility for Win98 Power
Management settings.
Power Management Mode
When the Power Management Mode parameter is set to Enabled, you can
configure the different power saving timers to your desired settings. Setting
this parameter to Disabled deactivates the power management feature and all
the timers. The default setting is Enabled.
Power Switch< 4 sec.
When set to Suspend, this parameter adds the suspend function to the
system power button on the front panel. The suspend function allows you to
put the system into suspend mode by pressing the power button for less than
four seconds while the system is on. When this parameter is set to Power off,
the power button simply turns the system power on or off. This parameter is
set to Power off by default.
Modem Wake-Up on Ring
This parameter allows you to enable or disable the Modem Wake-Up on Ring
feature. When enabled and if the computer is in suspend, an incoming call
automatically resumes normal power on mode. When disabled, the system
does not return to the "normal on" state even if there is an incoming modem
access. The default setting is Enabled.

Startup Options

From the Setup main menu, select Startup Options to view or change start-up
configuration settings. The Startup Options menu appears. This menu
identifies the start-up devices.

Date and Time

From the Setup main menu, select the Date and Time option to view or
change the system clock from the Date and Time menu.

Advanced Options

From the Setup main menu, select the Advanced Options option to view or
change a variety of configuration settings. The Advanced Options menu
appears, with the following options:
−
Security Options
1-18