Uniden 6035 + 1 Owner's Manual page 52

Symptom
The Caller ID does not
display.
The handset doesn't ring or
receive a page.
You cannot register the
handset at the base.
The handset doesn't
communicate with other
handsets.
An extra handset can't join
the conversation.
The answering system does
not work.
Time stamp cannot be heard.
Messages are incomplete.
There is no sound on the
base or handset speaker
during call monitoring or
message review.
DECT6035, 6035+1 OM.indb 51 DECT6035, 6035+1 OM.indb 51
• The call was placed through a switchboard.
• Call your telephone provider to verify your Caller ID service is current. There may
be a problem with your Caller ID service.
• Make sure that you are not too far from the base.
• Make sure that your handset is registered to the base.
• Charge the battery in the handset for 15 to 20 hours.
• Charge the battery pack in the handset for 15 to 20 hours.
• Try resetting the handset (see Resetting the Handset on
• Make sure that you have registered all handsets to the same base, and all
handsets are selecting the base (see page 21).
• Make sure there are not two handsets already using the conference feature.
• Make sure that another handset is not in privacy mode.
• Make sure that you have registered both handsets to the same base, and both
handsets are selecting the base (see page 21).
• Make sure the base is plugged in.
• Make sure that the answering system is turned on.
• Make sure that the message record time is not set to announce only.
• Make sure you have set the time (see Setting the Day and Time on
• Incoming messages may be too long. Ask callers to leave a brief message.
• The memory may be full. Delete some or all of the saved messages.
• Adjust the speaker volume on the base or handset.
• Make sure the call screen feature is set to on.
51
Suggestion
page 48).
page 40).
8/8/07 3:25:47 PM 8/8/07 3:25:47 PM