Using The Voice Mail Service; Resetting The Voice Message Waiting Indicator; Customizing Your Phone; Changing The Handset Banner - Uniden 6035 + 1 Owner's Manual

Using the Voice Mail Service

If you subscribe to a voice mail service, you can use your phone to access your voice mailbox. The new message
LED on the handset fl ashes and
voice mailbox. When you subscribe to the service, your voice mail provider provides you with the access number
and the required voice mail signaling tone. You can use your phonebook to store the access number.

Resetting the Voice Message Waiting Indicator

When you receive a new voice mail message, the new message LED on the top of the handset fl ashes and
appears in the handset display. In the event your message alert tone gets out of sync with your phone company's
voice messaging system, you can reset back to its original "no messages waiting" state. To reset, press and hold
[fi nd hs] on the base for fi ve seconds. A beep sounds and the message alert tone is reset.

Customizing Your Phone

Changing the Handset Banner

Each handset will display a banner name once it is registered to the base. The default banner is Handset #1,
Handset #2, etc. You can change the name your phone displays by changing the banner display. If you have more
than one handset, the banner name identifi es your handset.
1) Press [Menu/Select]. Select the HANDSET SETUP menu, and then the BANNER submenu.
2) Use the keypad to enter or edit the banner name. (See Entering Text from Your Handset on page 11 for detailed
instructions on entering text.)
3) Press [Menu/Select]. You will hear a confi rmation tone.
Note: When you have multiple bases and even if the handset ID is changed when you switch to a different base,
the handset will keep the banner name.
DECT6035, 6035+1 OM.indb 26 DECT6035, 6035+1 OM.indb 26
appears in the handset display whenever you have messages waiting in your
26
8/8/07 3:25:42 PM 8/8/07 3:25:42 PM