Specification - Mitsubishi PLK-E1008H Technical Manual

2. SPECIFICATION

(1) Specification of mechanism
Sewing area
Maximum sewing speed
Sewing speed
Stitch length
Stitch type
Class of needle
Needle bar stroke
Thread take up lever stroke
Stepping foot lift
Work holder lift
Thickness of material
Hook
Bobbin
Thread trimmer system
Pre heating
Thread
Lubrication system
Lubrication oil
X-Y drive system
Machine dimension
Weight
Type of controller
(2) Specification of main motor
Type of motor
: X-Direction(left/right)
: 100mm
: 700spm
: 10 steps variable from 200 to 700 stitch/min
: 0.1 to 12.7 mm
(Adjustable from 0.1mm to 12.7mm by 0.1mm resolution. )
: Single needle lock stitch
: Schmitz 794 #230
: 56.6 mm
: 94 mm
: 16mm
: 20mm (25max.)
: Max 10mm
: Barrel shuttle hook
: Large size bobbin
: Heat cut system
Amount of heating time is selectable by selecting setting table
Voltage IN : AC 210/230V OUT : AC 1V
available by using Function Code 4
: #8～#00 (Synthetic)
: Manual oiling
: White machining oil
: Stepping motor and timing belt drive
Intermittent or continuous feeding
:
HEAD 410W x 780L x 540H TOTAL 1200W x 780L x 1320L
: HEAD 92Kg TOTAL 172Kg
: PLK-E-CU-20
: XL-554-20
2
Y-Direction(fore/backward)
80mm