Specification - Mitsubishi PLK-E2010R Instruction Manual

2. SPECIFICATIONS
Machine model
Sewing area
Maximum sewing speed
Sewing speed
Stitch speed
Stitch length
Stitch type
Needle bar stroke
Thread take up lever stroke
Class of needle
Wiper system
Work holder lift *1
Stepping foot stroke *2
Hook
Bobbin case
Bobbin
Thread trimmer system
Lubrication system
Lubrication oil*3
Machine dimension
Steel stand
Drive source pneumatic pressure : Primary side 0.5MPa (5kgf/cm
Weight
*1 Stepping foot lift means the clearance between the bottom of the stepping foot and the surface of the
sliding plate when the sewing machine is stopped.
*2 Stepping foot stroke means the vertical movement of the stepping foot during the sewing operation.
: PLK-E2010R
: X Direction (left/right) 200mm
Y Direction (forward/backward) 100mm
: 2,300 S.P.M. (up to 4mm stitch length)
: 10 steps variable from 200 S.P.M. to 2,300 S.P.M.
: Adjustable from 0.1mm to 12.7mm by 0.1mm resolution.
: Adjustable from 0.1mm to 12.7mm by 0.1mm resolution.
: Single needle lock stitch.
: 40mm
: 72mm
: DP X 17 #18 (standard specification)
: Back to forth wiping system (standard)
: 25mm (max.)
: Variable from 4mm to 10mm (4mm is standard)
: Large size rotating hook.
: With non racing spring.
: Large size steel bobbin.
: arc engagement with fixed knife and movable knife
: Manual oiling and replenishment with the oil braids from the oil tanks.
: White machining oil.
: 1, 200mm(W) x 920mm(L) x 1, 170mm(H)
: T-shape steel stand for standing or sitting operation.
Secodary side 0.4MPa (4kgf･cm
: 136kg (total net weight).
- 2 -
2
)
2
)