Specification - Mitsubishi PLK-E0504 Technical Manual

2. SPECIFICATION

(1) Specification of mechanism
Sewing area
Maximum sewing speed
Sewing speed
Stitch length
Stitch type
Needle bar stroke
Thread take up lever stroke
Class of needle
Wiper system
*1
Presser foot lift
*2
Presser foot stroke
Work holder lift
Hook
Bobbin case
Bobbin
Thread trimmer system
Lubrication system
Lubrication oil
X-Y drive system
Machine dimension
Weight
Type of controller
Steel stand
(2) Specification of main motor
Type of motor
*1：Stepping foot lift means the clearance between the bottom of the stepping foot and the surface
of the sliding plate when the sewing machine is stopped running.
*2：Stepping foot stroke means the vertical movement of the stepping foot during the sewing operation.
: X-Direction (left/right)
:
50mm
: 2,500 rpm
: 10 steps variable from 200 to 2,500 rpm
: 0.1 to 12.7 mm
: Adjustable from 0.1mm to 12.7mm by 0.1mm resolution)
: Single needle lock stitch
: 41.2 mm
: 68 mm
: DP × 17 # 18 (the standard specification)
: Back to forward wiping system
: 15 mm (18mm max.)
: Variable from 4mm to 10mm (4mm is standard)
: 25 mm
: Shuttle hook
: With non racing spring
: Large size aluminum bobbin
: Horizontal engagement with fixed knife and movable knife
Manual oiling and replenishment with the oil braids from the oil
:
tanks
: White machining oil
: Stepping motor and Gear drive
: Intermittent or continuous feeding
: 1,200mm(W) × 773mm(L) × 1,220mm(H)
: TOTAL 116Kg
: PLK-E-CU-20
: T-shape steel stand for the standing or the sitting operation
: XL-554-20
－2－
Y-Direction (fore/backward)
40mm