Adjustment Of The Needle-To Shuttle Clearance; Adjustment Of The Needle-To-Driver Clearance - Mitsubishi PLK-E1008H Technical Manual

(NO. ) is 0.25 ~ 0.35 mm.
To adjust the needle-to-shuttle clearance,
(1) Loosen screw (NO. ).
(2) Adjust the clearance by moving shuttle driving shaft bushing (NO. ) to the left and right.
(3) After adjustment has been completed, tighten screw (NO. ) firmly.

7-5 Adjustment of the needle-to-driver clearance

Correct clearance between the needle (NO. ) and the needle guard of the driver (NO. ) has
the range of 0 ~ 0.05 mm.
To adjust the needle-to-driver clearance,
(1) Loosen two screws (NO. ) and Bolt (NO. ).
(2) Adjust clearance by moving the shuttle driving shaft (NO. ) to the left and right.
(3) After adjustment has been completed, secure the shuttle driving shaft thrust collar (NO. )
and the small pendulum (NO. ), making sure there is no axial play of the shuttle driving
shaft.
24