Specification - Mitsubishi PLK-G6030 Technical Manual

2. SPECIFICATIONS
Model
Sewing area
Maximum sewing speed
Setting speed
Stitch length
Stitch type
Maximum number of needles
Storable sewing data item
Data memory
Needle bar stroke
Thread take up lever stroke
Class of needle
Wiper system
*1
Presser foot lift
*2
Presser foot stroke
Work holder lift
Hook
Bobbin case
Bobbin
Thread trimmer system
Lubrication system
Lubrication oil
X-Y drive system
Machine dimensions
(W)x(L)x(H)
Weight
Type of motor
Type of controller
Type of operation panel
Power
*1：Presser foot lift is the height of the presser foot after the sewing has stopped.
*2：Presser foot stroke is the up and down movement of the presser foot while sewing.
PLK-G4030
X-direction (left/right) 400 mm
Y-direction (front / back) 300 mm
2,000rpm
10 speed levels in 200 rpm to 2,800 rpm
0.1 to 20.0 mm
Single needle lock stitch
20,000 per pattern
520 patterns (internal memory)
Internal memory, USB memory
41.2 mm
68 mm
DPX17#18 (at standard installation)
Back to front wiping system
15 mm (12 mm as factory default setting)
In 4 mm to 10 mm (4 mm as factory default setting)
30 mm
Large size shuttle hook
With non racing spring
Aluminum bobbin
Horizontal engagement with fixed knife and movable knife
Manual oiling and replenishment with the oil braids from the oil tanks
Pulley SF oil
Stepping motor feedback control
Timing belt drive system. Intermittent or continuous feeding
1,185mm x 1,572mm x
1,234mm
Total 420 Kg
XL-K756-20
PLK-G-CU-20
PLK-G-PAL-2
The power in 110V to 120V or in 380V to 415V is compatible with
power unit (option)
- 2 -
PLK-G6030
X-direction (left/right) 600 mm
1,350mm x 1,572mm x
1,234mm
Total 440Kg