ICP DAS USA PCI-1202 Series Hardware User Manual page 57

The middle-trigger driver for PCI-1800/1802/ver-C is given as follows:
WORD CALLBACK P180X_StartScanMiddleTrgVerC(WORD wSampleRateDiv, DWORD
dwNum, SHORT nPriority)
{
disable_timer0(); // disable internal pacer timer
disable_timer1(); // disable external pacer timer
wVal=pic_control(0xD400); /* 11?1 01?? ???? ???? cmd_101=start scan */
if (wVal!=0) return(wVal);
_outpw(wAddrCtrl,0xf000);
enable_timer1(wSampleRateDiv); // 2. Sampling rate=8M/dwSampleRateDiv
_outpw(wAddrCtrl,0x6800);
_outpw(wAddrCtrl,0xE800);
_outpw(wAddrCtrl,0xF800);
// create magicscan thread
InitializeCriticalSection(&MagicScan_CS);
wThreadStatus=0; wPreMid=1; wAskThreadStop=0; // middle-trigger
hThread=CreateThread(NULL,0,(LPTHREAD_START_ROUTINE,
magic_scan_pre_mid_trg_ver_c, NULL, 0,&dwThreadID);
SetThreadPriority(hThread,nPriority);
i=0;
for(;;)
{
EnterCriticalSection(&MagicScan_CS);
j=wThreadStatus;
LeaveCriticalSection(&MagicScan_CS);
if (j!=0) break;
i++; Sleep(1);
if (i>1000) return(ThreadCreateError);
}
return(NoError);
}
This driver is designed for PCI-1800/1802 version-C
PCI-1202/1602/1800/1802 Hardware User's Manual
// 1. disable all external trigger
// 3. B15=0,S2=0,S1=1,S0=0 --> clr FIFO
// 3. B15=1,S2=0,S1=1,S0=0 --> enable timer-1
// 4. S2=1; S1=1; S0=0 --> wait ext signal to
// disable timer-1
(Ver. 4.2, Dec/2009, PMH-014-42)---- 57